Throttle pedal travel

[johnnyoz]

Thanks for the reply.I have shortened the carb lever and changed the travel a bit.I think that really I need to change the leverage ratio at the pedal.I made a jig to test possible ratios,but that means lengthening the top of the pedal where the cable fits.That means that I will need to drill a new hole for the cable entry into the bulkhead.As you say,the pedal is hard to get to.I was hoping that somebody had thought of a clever idea to make things easier.I may have to remove the drivers seat.....
                             John

[Jonny427]

You may be able to get different cams on the carb to suit, or bend the peddle.  There are two bolts holding the peddle to the box, might be a bit of a squeeze though.

[johnnyoz]

Hi,I have a RAM with a holley carb.Has anybody modified the Marina throttle pedal operation to give a shorter travel? At the moment full throttle is right to the bulkhead and is an uncomfortable stretch.
               John