News:

🌞 Calling All UK Cobra Club Members! 🐍🚗

We've been lucky enough to enjoy some fantastic weather recently, so we're sure many of you have been out making memories in your Cobras! Whether you've been on an epic road trip 🛣�, enjoyed a local car meet 🚘, explored stunning countryside 🌄, tackled an unforgettable adventure 🏁, or even had one of those unexpected breakdowns or mishaps that make for a great story 🔧😅 – we'd love to hear all about it!

Help us fill the UK Cobra Club Website and Magazine with your stories, photos, and experiences. Your adventures inspire fellow members and help make our club community even stronger.

📧 Website submissions: webmaster@ukcobraclub.co.uk
📧 Magazine submissions: magazine@ukcobraclub.co.uk

Don't forget to include plenty of photos! 📸 We can't wait to share your Cobra journeys with the rest of the club.

Happy motoring and enjoy the sunshine! ☀️🐍🏎�

Main Menu

Electric Power steering Wiring

Started by Gazc2, Jan 20, 2026, 11:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

johnnycobra

Quote from: Gazc2 on Jan 21, 2026, 05:25 PMThanks for the input I was contemplating taking the feed from the starter or Alternator as its a fairly meaty cable on the pump the alternator is nice and close so will make up a little loom to get the relay hidden.

cheers


 Mine is run from the Alternator  .. been good from 2021 ....
Gary
351 Windsor ... Paint is Kandy Brandy wine over course silver. Age related plate on an   F .

Gazc2

Thanks for the input I was contemplating taking the feed from the starter or Alternator as its a fairly meaty cable on the pump the alternator is nice and close so will make up a little loom to get the relay hidden.

cheers

Gary

incey1966

I ran a feed from the alternator onto the bulkhead through a large fuse, into an ignition switched relay. Then I ran the output to the pump which I mounted in the LHS front of the engine bay, above the power steering rack.
I hope that makes sense...

Gazc2

So I have an AK with a Saxo electric power steering pump, where is the best place to feed this from as there is no provision within the loom.

any help appreciated

Gary