Which UJ?

[Ken]

And make sure you mark the position of prop shaft to keep things in balance .

Many thanks for the replies. I think I'll let the local garage sort it out

[Chris]

And make sure you mark the position of prop shaft to keep things in balance .

[Chris]

You will need to remove the prop shaft then remove the uj's so you can measure the outer cups.
This is a reasonable easy job to do if the prop has circlips to hold the cups in place, if not you will need
to get the prop refurbished at a machine shop.
If you have the circlip type you can easily do the job with a few sockets and a good vice, just be careful not
to drop any of the rollers into the cups .
Online is proberbly the way to go for the the replacement uj's unless you have a proper motor factors shop
nearby.
It use to be much easier back in the day for these kind of bits, thus is life ...
Chris.
 

[Happy Jim]

Will probably depend on what diff/gearbox you have.

[Ken]

Planning a long trip next year, towing my little caravan. There is some play in the rear propshaft UJ.
Anyone know what fits that???
Pilgrim dont have a clue......very helpfull !!