Powder coating steering arms?

[Dek]

Mine are 20+ years old, coat of hammerite and they're still good.
Cheers
Jim

Another big fan of Hammerite, easy preparation, long lasting and most importantly can be easily touched up.
Dek

[MartBlak]

Mine are 20+ years old, coat of hammerite and they're still good.
Cheers
Jim

Thanks Jim, I reckon I will be going down that path also.

[Happy Jim]

Mine are 20+ years old, coat of hammerite and they're still good.
Cheers
Jim

[MartBlak]

I have given up on trying to adjust the tracking using my old steering arms as they were too bent. I now have new arms from Andy at GD and was wondering whether they should be powder coated or whether Hammerite would do the job (or VHT paint?).

There is a place near here that will powder coat but they have a £30 min order quantity. Is it worth getting it done or would Hammerite do the job (I already have a pot lying around). I assume there will be a heat issue as they are close up  against the discs?

Thanks for any advice on what you have used and whether it has has passed the test of time.

Martin