So I have an AK with a Saxo electric power steering pump, where is the best place to feed this from as there is no provision within the loom.
any help appreciated
Gary
I ran a feed from the alternator onto the bulkhead through a large fuse, into an ignition switched relay. Then I ran the output to the pump which I mounted in the LHS front of the engine bay, above the power steering rack.
I hope that makes sense...
Thanks for the input I was contemplating taking the feed from the starter or Alternator as its a fairly meaty cable on the pump the alternator is nice and close so will make up a little loom to get the relay hidden.
cheers
Gary
Quote from: Gazc2 on Jan 21, 2026, 05:25 PMThanks for the input I was contemplating taking the feed from the starter or Alternator as its a fairly meaty cable on the pump the alternator is nice and close so will make up a little loom to get the relay hidden.
cheers
Mine is run from the Alternator .. been good from 2021 ....
Gary